INTRODUCTION

INTRODUCTION TO SCADA Pro 48 2. on a surface with surface elements, you can select individual elements and explore their properties 3. by selecting a slab (either from TREE in the Slab subgroup or from the Slab section by left- clicking on its surface), its properties are displayed in the properties field. 4. In the properties of Line and Polyline it displays in the properties and their length L in meters (m). picture below: in cm). When an element is inserted with a first and second point, after the first point and before the second point, with the movement of the elastic line shows the current coordinates and the distance from the first point in cm. For example, having defined the first point in the design of a line and before defining the next point, the coordinates (x,z and y-height) of the point where the cursor is located (the second end of the elastic line displayed on the screen) and in brackets the distance from the first point as in the x=1455.6, z=1337.0 y=400 distance=423.4 (all By selecting the More in the properties of a selected Beam-Pillar-Column-Multiplication- Lattice, Member, Node, the corresponding window of the element's properties opens where you can make all the changes you wish: