EXAMPLE 9. INTEGRATED EXAMPLES OF FLAT PLATES

EXAMPLE 9 - FLAT PLATES 35 The results of the audits include two audits. If the 1 th check shows Adequacy , then the 2 th check determines the requirement or not of the perforation reinforcement. If the 1st ( 1st ) check shows Non-adequacy , then the 2nd ( 2nd) check is not performed and some interventions are suggested for the plaque. As mentioned, in the particular example (node 40 shown in the figure below) being solved, the loading level is not such that shear hardening is required. In other words, there is adequacy in the second check as well. The shear test for this particular column gives a strength-to-strength ratio of 0.291/0.356 = 0.81.