EXAMPLE 6. BUILDING VALUATION & REDESIGN STUDY

EXAMPLE 6: "STUDY FOR THE VALUATION AND REDESIGN OF A BUILDING ACCORDING TO THE CANC. 33 3 h revision of the EIA CIP For steel, the material safety factor γs now depends not only on the material data reliability level but also on the detail data reliability level. These two new options have therefore been introduced: The option Laboratory Values CANEPE 2022 was also introduced, where the cs is derived from a combination of the two SDSs and the option Absent Values CANEPE 2022 was also introduced where the requirement for steel is that the material SDS is satisfactory (rather than tolerable which was in the previous revision). All other values are automatically filled in and with the Update the Constants for the Existing Steel (main & fasteners) are calculated. Finally, by selecting the "Apply to all categories of items" button, the materials you specify for one category of building elements (e.g. Pillars) are automatically copied to all other categories of building elements and so you do not need to specify them again, provided of course that the qualities are the same.