EXAMPLE 6. BUILDING VALUATION & REDESIGN STUDY

EXAMPLE 6: "STUDY FOR THE VALUATION AND REDESIGN OF A BUILDING ACCORDING TO THE CANC. 116 • In the " Calculate constant LS shear length value " option you specify: - if the shear length of the elements will be calculated with a fixed value based on the length as provided for by the CANEP* (ticked) - or whether it will be calculated on the basis of the resulting intensive magnitudes, where Shear Length = M/V at the end section of the element, i.e. the distance of the end section from the zero point of the moments. As far as shear length is concerned, the method of calculation is important, both for the classification of the elements into plastic and sandy and for the method of calculation of local plasticity indices where the calculation of θy and θu is required. 3 h revision of the EIA: • The gg depends on the geometry and • The cRd from the worst SDS between material and details. So in the four scenarios of the CANPE of the elastic analysis, in the context of a dialogue that is displayed with the CANOPE button, all three SIDs are now displayed • Select: For each Data Reliability Level • Extent of Damage The γsd factor is automatically calculated based on the corresponding option, • The value 0 in the field means that the coefficient will take the value based on table .4.2. of the EIA . If you want your own value, enter a number and it will be added up to the value provided by the table. Calculations are made based on the resulting sum. Where more precise data are not available, cSd values according to the following Table may be used.