EXAMPLE 5. NEW BUILDING DESIGN FROM LOAD-BEARING MASONRY

EXAMPLE 5: 'DESIGN OF A LOAD-BEARING MASONRY BUILDING' 52 6.6 Show reasons for depletion with Color Grading In the new version of SCADA Pro you now have the possibility to display all the reasons that are also printed in the respective issues. By right-clicking on the desktop and selecting "Show Color Gradients" You can see the reasons for: ⮚ New masonry building (EC6) 1. Bending within level 2. Bending out of plane parallel to the horizontal joint 3. Bending out of plane perpendicular to the horizontal joint 4. Shear 5. Check for Vertical Loads 6. Looseness check for vertical loads At this point it should be stressed that especially in new masonry the wall is not painted in its entirety. Only the section from which the specific reason is derived is coloured. For each wall, we see the position of the corresponding worst section (coloured) and the ratio. Especially for vertical loads we see the three corresponding sections at the top, middle and base of the wall. (See. In. Use 10d. DIMENSION - Display of depletion ratios with colour grading p.15)