EXAMPLE 5. NEW BUILDING DESIGN FROM LOAD-BEARING MASONRY

EXAMPLE 5: 'DESIGN OF A LOAD-BEARING MASONRY BUILDING' 22 You can register the configured vector as a .stp file by selecting the Register button, creating your own library of standard constructs. With the Open command you can call a registered frame at any time. ATTENTION : Make sure that the wall thickness you set in the library has the same value as the thickness of the walls you set in the standard constructions. ATTENTION : Within the standard constructions field you can set a single thickness for all walls. In case there are walls with different thicknesses in the design, the modification will be done later within the field of grids. ( Modelling->3D- >Mesh ) After completing the process for each face and each opening, insert the vector into the desktop by selecting the OK button.