EXAMPLE 4. METAL STUDY CONSTRUCTION WITH 3D DWG

EXAMPLE: 'DESIGN OF METAL CONSTRUCTION' 68 From the " Bend lengths " field you can select the support conditions of the member via the icons. Depending on these, the program calculates a coefficient, e.g. for a double-jointed member = 1.0. Here you select 1,0 in both directions. Then click on the side bend field to have the program perform the corresponding check. Here you need to describe the " Edge Binding " , the " member loading " form by y and z, and the " loading level " . Also, perform the functionality check and torsional bending, click on the respective fields. The parameters for torsional flexure are the same as those you gave for flexural flexure. After you have entered all the parameters, you are returned to the previous window. Here if you select " Apply to all members of the layer " then the parameters you set before for the selected member will be applied to all members of the corresponding layer By activating and selecting the command " Check layer " , the calculation of all members starts taking into account only the maximum and minimum of the combinations, which makes the process faster. At the end