EXAMPLE 4. METAL STUDY CONSTRUCTION WITH 3D DWG

EXAMPLE: 'DESIGN OF METAL CONSTRUCTION' 28 3.1.3 Roof treatment Similarly, from "Edit> " Roofs ", define the type of roof, its orientation and the dimensions Lo,L1,L2,L3, by pressing and selecting each time with the mouse the 4 edges of the roof, as well as the Geometric Elements. 3.1.4 Wind Show With the command " Show " > " Wind ", you can see for each wind direction the distribution of pressure per height with the coefficients Cpe+ , Cpe- , Cpi , for each wall and for the roof. 3.1.5 Snow Show Similarly, from the next option you can see the snow load distributions on your roof during the EC1. 3.1.6 Matching members The next step is to define the zones. This is to determine distribution of pressure (wind and snow) on the structural elements of each facade and roof. Select the command and in the dialog box you select one by one the walls and/or roofs for the distribution. In the new version of SCADA Pro, the automatic calculation of the influence surfaces for the linear members was completed and integrated in order to distribute the wind and snow loads.