Table of Contents 1 108

EXAMPLE 1. NEW BUILDING DESIGN FROM REINFORCED CONCRETE

CONTENTS 2
FOREWORD 4
INTRODUCTION 4
THE NEW ENVIRONMENT 4
GENERAL DESCRIPTION 6
1.1 Geometry 6
1.2 Materials 6
1.3 Regulations 6
1.4 Loading - analysis assumptions 6
1.5 Comments 7
DATA IMPORT - MODELLING 8
2.1 How to start a new study: 8
IMPORTANT NOTE: 9
ADDITIONAL INFORMATION: 9
2.2 Automatic Section Recognition from dwg file: 11
IMPORTANT NOTE: 15
OBSERVATION: 15
CONDITIONS: 16
2.3 Insert a new floor plan (new dwg file) into the existing model to create the additional floors: 20
2.4 Mathematical and Physical Model: 22
2.5 Automatic insertion of Pedestals and Connecting Beams at the foundation level: 24
2.5.1 Sandals 26
2.5.2 Connecting beams 27
2.6 How to insert a paving: 27
OBSERVATION: 27
2.7 How to simulate the basement walls: 30
2.8 How to insert footings under basement walls: 31
2.9 Creating a mathematical model: 32
Connection of Column Nodes with Surface Grid 33
2.10 Three-dimensional imaging: 34
2.11 Connection of basement wall nodes - High stiffness beam member: 35
2.12 How to create a slope: 36
PLANS 41
3.1 How to insert solid slabs: 41
3.2 How to create a slab with gaps: 43
3.3 Insertion of plate sections: 45
3.4 In case of a sloping slab: 45
OBSERVATION: 47
SHELTERS 48
4.1 How to set uploads: 48
4.2 How to insert loads into the plates: 48
4.3 How to distribute the loads of the plates: 50
4.4 How to import loads of members: 51
OBSERVATION: 51
ANALYSIS 56
5.1 How to create an analysis script 56
5.2 How to run an analysis script 61
& OBSERVATION 62
Feature Periods: 63
5.3 How to check the results of the analysis and create the combinations 71
5.4 Checks 73
5.5 Seismic action 74
RESULTS 75
6.1 How to view diagrams and deformations, as well as the reinforcement of the paving : 75
6.1.1 Body+ "Deformed Body" 76
6.1.2 Charts - Equalisation 77
DIMENSIONING 80
7.1 How to create dimensioning scripts : 80
7.2 How to define the parameters of dimensioning, per building element : 81
(See Internal Use Chapter 9 "Sizing") 81
ATTENTION 82
Combinations 83
ATTENTION: 84
OBSERVATION: 84
7.3 How to size the beams: 85
7.4 How to do the satisfaction check: 92
OBSERVATION: 93
7.5 How to size poles and walls: 94
(See Internal Usage Chapter 9 "Sizing") 94
OBSERVATION: 97
OBSERVATION: 98
7.6 How to size the plates: 99
OBSERVATION: 99
7.7 How to size the sandals: 100
OBSERVATION: 100
WOODEN DOORS 101
8.1 How to import formwork and beam expansions into the design environment: 101
From file Beam Expansions (*.per) : 103
8.2 How to import into the drawing environment detailed post details with the possibility to modify them directly from within the editor: 105
COPY 106
9.1 How to create the study issue: 106
OBSERVATION: 106

RkJQdWJsaXNoZXIy NTIwNzc=