EXAMPLE 1. NEW BUILDING DESIGN FROM REINFORCED CONCRETE

EXAMPLE 1: 'REINFORCED CONCRETE CONSTRUCTION STUDY' 50 4.3 How to distribute the loads of the plates: After inserting the loads into the plates, select: "Leakage lines": to calculate the loading surfaces resulting from geometric division of the floor plan surface, which are then used to calculate the design actions of the beams (surfaces whose loads will be applied to the beams), The calculation is done automatically by the program according to the support conditions, either Overall per level, by simply selecting the command, or Selectively , by selecting the slabs one by one. and "Reaction Rendering": to render the loads of the plates as reactions to the members defining the plates. More specifically, loads from the plates are attributed to beams and nodes, based on the geometric division made previously (yield lines). Total: attribute the loads of all plates of the active floor. Selectively: to assign the loads of the selected plates by left-clicking inside its surface. Homomorphism : With this option, the loads of the slabs are applied (in total or selectively, respectively) to the members, but without the geometric division of the leakage lines into rectangles and triangles, but by reducing the entire surface corresponding to the member to an equivalent rectangle.