EXAMPLE 1. NEW BUILDING DESIGN FROM REINFORCED CONCRETE

EXAMPLE 1: 'REINFORCED CONCRETE CONSTRUCTION STUDY' 49 In the dialog box select, load, load type and enter a value in (KN/m 2 ). " Select " and click on the plate. The "Preset load" button includes a library of coating materials, which automatically updates the value of the imposed load. The user can update the library with new materials by setting the corresponding load values. In the dialog box select, load, enter a value in (KN/m 2 ) and click on " General " to enter this value in the plates of all types. The " Insert " command creates the load but does not apply it definitively. The final application is done by clicking on the "Apply" button. Select another charge and repeat the process. To apply the loads you have just set to the slabs, select " Apply ". The loads are automatically distributed evenly over the surface of the floor plates. The first time you enter a load (e.g. permanent) after the " Insert " command you select the " Apply " command. Then , if you want to insert a mobile load, you define it and select " Add ". In this example, 1KN/m2 permanent and 2KN/m2 mobile load was applied to all plates.