EXAMPLE 11. MASONRY WITH THE EQUAL FRAME METHOD

PARADEIGMA 11: " MASONRY M.I.P." 7 2.2 OPENINGS Then the openings are defined: ▪ Geometry ▪ Pretzels ▪ Static Rod function The procedure is similar to that of fixing the walls: 1. We give a name to the opening 2. With the help of Pick we graphically define the geometry of an opening 3. If there are Presses we select their position and their cross-section and if they apply to all openings of the same wall, then we select ¨Apply to all openings of the wall¨, so that the same presses and the same cross-sections are automatically applied. other openings that we will make for the same wall. 4. In the field ¨Static simulation rod mode¨ we select one of the three ways of participation of the transoms and legs in the mathematical simulation: • Full connection • Partial connection • To disregard 5. By selecting the command, the specified opening is added to the list. Η ¨Delete¨ deletes it, ¨Update¨ informs it about possible changes, ¨View¨ marks it graphically for easy identification in the vector. 6. The process is repeated until all openings of the selected wall are defined. 7. ¨Exit¨ to close the opening window and continue with remaining walls and openings. The modelling is completed when the definition of all walls and openings at all levels is completed and the calculation of the mathematical model is done.